Acreage Calculator
Convert a plot's length and width into acres, hectares and square feet for land, site and agricultural work.
Measurements & Conversions
Floor areas, façade areas, and the units land is bought and registered in.

Square feet, square metres and square yards between one another; square inches and square millimetres for section properties and small components; acres, hectares and square feet for plots; and area straight from a set of dimensions when what you have is a room rather than a figure.
Whether the number in front of you is measured flat or measured over a surface. A roof plan and a roof slope differ by the secant of the pitch, and at 30° that is 15% more covering than the plan says; a wall area net of openings and the same wall gross can differ by a third. Every page here converts the figure it is given faithfully and none of them can tell which kind it was, so the page says which one you should have brought.
How much paint, tile or turf the area consumes, which belongs to the material being laid on it.
16 calculators
Convert a plot's length and width into acres, hectares and square feet for land, site and agricultural work.
Convert acres to hectares for metric planning submissions and international land descriptions.
Convert acreage into square feet for material take-off across a site.
Convert hectares to acres for US land descriptions, deeds and site comparisons.
The area of a plot, bed or slab that is not a rectangle, from offsets off a baseline by the trapezoidal or Simpson's rule, or from its corner coordinates.
Convert land area between acres, hectares, square feet, and square meters — all shown simultaneously.
Convert a site area from square feet to acres for plot descriptions and planning documents.
Convert floor, wall or roof area from square feet to square metres for metric material orders.
Convert a measured area in square feet into square yards for carpet and turf ordering.
Calculate the area of a rectangle, circle, or triangle, shown simultaneously in square feet, square meters, square yards, and acres.
Convert a cross-sectional area in square inches into square millimetres — for rebar schedules, steel sections and glazing bites.
Convert an area in square metres to square feet for US material coverage and pricing.
Convert a metric floor area into square yards to read a US flooring quote.
Convert a metric cross-sectional area into square inches, for checking metric bar and section areas against imperial tables.
Convert square yards to square feet for carpet, turf and paving quantities.
Convert a carpet or turf area in square yards into square metres for a metric quote.