SettingsSettings for this calculationUS
How many standing workstations need anti-fatigue matting.
Count each individual standing work position, such as a production line station, packing bench, or standing desk location.
The area of a single anti-fatigue mat placed at one workstation — a 0.6 × 1.4 m mat is 0.84 m², a 3 × 3 ft mat is 9 sq ft.
A common standard size is around 0.6m x 1.4m (0.84 m², about 9 sq ft), but mats are made in many sizes — check your specific product, or increase this if a station needs multiple mats.
Total mat area needed
90.42 sq ft
They open the calculator with your figures already in it
Anti-Fatigue Mat Flooring Area Calculator: 90.42 sq ft — shown in imperial, US market. The link sets both, so the result they see is the one on your screen.
Show calculation logicHide calculation logic
How this was calculated
Formula source(s)
- Total mat area = number of workstations × mat area per station, based on a standard anti-fatigue mat size (commonly around 0.6m × 1.4m = 0.84m²)
Inputs used
- Number of Workstations
- 10
- Mat Area per Station
- 9.04 sq ft
What this calculation does not cover
- Produces an area, not a layout. Matting is bought in fixed sizes and a standing position needs a whole mat under it, so four stations at 0.84 m² (9 sq ft) each is four mats rather than 3.36 m² (36 sq ft) of matting to be divided up.
- Counts workstations, not the standing area at each one. Somewhere a person moves along — a packing bench, a saw table — needs a run of matting set by how far they travel, which is not a count of stations.
- Ignores the edge. A mat meeting bare floor without a bevelled edge is a trip hazard, and a bevelled mat covers less usable standing area than its nominal size.
- Says nothing about whether matting suits the work. Thickness, density, and resistance to water, oil or static decide whether a mat helps or becomes a hazard, and none of them is an input here.
Estimated cost — your price
This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.
Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.
Sources checked 2026-08-30 · in the site-wide review of 2026-09-06 · v1.1.0
Regulatory standards & verification citations1
- Total mat area = number of workstations × mat area per station, based on a standard anti-fatigue mat size (commonly around 0.6m × 1.4m = 0.84m²)
Cite this page
Your workspace
Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.