From this site

One project, every trade

Each calculator adds its lines to a single estimate — consolidated BOM, schedule and cash-flow included.

Open My Project →

Square Feet to Bricks Calculator

Convert a wall face area into a standard modular brick count before adding waste.

Computed in your browser — nothing you enter is uploaded. Figures are presented for United States against IRC 2024, and every formula is cited under regulatory standards below.

Last verified 2026-08-26 · v1.0.0

Market
Imperial · sales tax

Bricks (before waste)

1400 bricks

High confidence

About 7 modular bricks per sq ft of single-wythe wall with a 3/8 in joint. Assumes standard modular brick with a 3/8 in joint in running bond — confirm the yield for your actual unit.

Conversion factor applied
7 bricks per sq ft

Brick take-off runs from wall face area to unit count, and the yield depends on the brick and the joint rather than being a universal figure. About seven per square foot suits standard modular brick with a three-eighths inch joint in a running bond, which covers a great deal of North American work and none of the formats used elsewhere. Two things change the answer materially. Bonds that use headers consume more brick than the face area suggests, because a header turns into the wall rather than along it. And joint thickness has a surprisingly large effect across a whole elevation, since it changes how much wall each unit covers. Confirm the yield against the actual brick before ordering.

Estimated cost — your price

This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.

Preliminary estimate, not certified engineering. This tool produces an indicative quantity calculation for planning purposes only — it is not a certified structural analysis, a guaranteed material takeoff, or a substitute for building department approval. Always verify measurements on-site and have a licensed contractor or structural engineer review any load-bearing, code-sensitive, or safety-critical work before purchasing materials or starting construction. Spotted an arithmetic or standards error? Report it to contact@craftquantities.com with your inputs — confirmed fixes become pinned regression tests.

[Schema Verified] Computed in alignment with American Concrete Institute (ACI 318-19) formulas and International Residential Code (IRC 2024) spatial boundaries.

Regulatory standards & verification citations

  • Standard modular brick with 3/8 in joints yields approximately 7 bricks per square foot of wall face
  • Joint thickness and brick format change this materially — always confirm against the actual unit

Your workspace

Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.

Frequently asked questions

Does the bond pattern change the count?
Running bond and stack bond use the same number per area, but patterns with headers — Flemish and English bond in particular — consume more because headers turn into the wall. A decorative bond needs its own count rather than this one.
Is seven bricks per square foot universal?
No, it is specific to standard modular brick with a 3/8 inch joint. Other formats and joint thicknesses give different yields, and imperial, metric and oversized bricks all differ. Confirm against the actual unit being supplied.
How much waste for brickwork?
Enough for cuts at openings and reveals, plus breakage in handling and delivery. Reclaimed and handmade brick needs more, since a proportion will be unusable and colour matching a later top-up is difficult.