Craft Quantities
Plan & Takeoffs

Measurements & Conversions

Metric Tonnes to Short Tons Calculator

Convert metric tonnes to US short tons for American suppliers, scales and weight limits.

  • Answers as you type
  • Every formula cited
  • Calculated in your browser
SettingsSettings for this calculationUS
Market
Imperial · sales tax
The weight in metric tonnes of 1,000 kg.

A metric tonne is about 10% heavier than a US short ton, so the same number of tonnes is always more material than the same number of short tons.

Weight

11.02 short tons

High confidence

1 tonne = 1,000 kg = 2,204.62 lb = 1.102311 short tons. A tonne is about 10% more material than a short ton — reconcile weighbridge tickets in matching units.

Conversion factor applied
1.1 short tons per tonne
Then change the inputs to see how far the answer moves.

Show calculation logic

How this was calculated

Formula source(s)

  • 1 metric tonne = 1,000 kg = 2,204.62262 lb = 1.10231131 short tons

Inputs used

Weight (tonnes)
10

Intermediate steps

Conversion factor applied
1.1 short tons per tonne
Final result11.02 short tons

Confidence note: 1 tonne = 1,000 kg = 2,204.62 lb = 1.102311 short tons. A tonne is about 10% more material than a short ton — reconcile weighbridge tickets in matching units.

What this calculation does not cover

  • This returns SHORT tons of 2,000 lb. An imperial long ton is 2,240 lb, so a tonnage converted for a British specification using this figure is about 12% high.
  • The word 'ton' on a delivery ticket does not say which is meant. Confirm against the weighbridge figure before the two are compared.

Estimated cost — your price

This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.

Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.

Sources checked 2026-08-26 · in the site-wide review of 2026-09-06 · v1.0.0

Regulatory standards & verification citations1
  1. 1 metric tonne = 1,000 kg = 2,204.62262 lb = 1.10231131 short tons
Cite this page

Your workspace

Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.

Imported material arriving with a metric weighbridge ticket, or a European specification being priced by an American supplier, both need this direction. A tonne is roughly ten percent heavier than a short ton, which means the same numeric quantity is more material — a distinction that turns into an apparent shortfall when a delivery is reconciled against an order placed in the other unit. Waste containers are a common place for this to bite: skip and dumpster hire agreements state a weight limit in the local convention, and exceeding it results in a surcharge or a refused collection, so an estimated waste tonnage should be converted into the unit the hire agreement actually uses before the container is booked.

Now that you have the number

These guides cover the work this quantity is for.

Called something else where you work? Ton / tonne — the term in each market, how close the equivalence really is, and the standard that governs it.

How to calculate metric tonnes to short tons in 2 steps

  1. Weight (tonnes)The weight in metric tonnes of 1,000 kg.
  2. WeightThe tool computes the weight from those figures and shows the formula, its sources, and a confidence rating alongside it.

Metric Tonnes to Short Tons at common values

Page defaults, not your figures above.

Weight (tonnes)Weight (short tons)
11.1
22.2
55.51
1011
2022
5055.1
100110

Frequently asked questions

Is a tonne bigger or smaller than a ton?
Bigger, by about ten percent, when compared with the US short ton. It is slightly smaller than the imperial long ton. So the same figure quoted in tonnes represents more material than the same figure in short tons.
Does a weighbridge ticket say which?
It should, and it is worth reading. A ticket from a metric yard will be in tonnes or kilograms, and reconciling it against an order placed in short tons without converting produces an apparent shortfall or surplus that is purely a units artefact.
How does this affect a skip or dumpster limit?
Container weight limits follow the local convention, and exceeding one can mean the container is refused or surcharged. Convert your estimated waste weight into whatever unit the hire company's limit uses before booking.
Preliminary estimate, not certified engineering. This tool produces an indicative quantity calculation for planning purposes only — it is not a certified structural analysis, a guaranteed material takeoff, or a substitute for building department approval. Always verify measurements on-site and have a licensed contractor or structural engineer review any load-bearing, code-sensitive, or safety-critical work before purchasing materials or starting construction. Spotted an arithmetic or standards error? Report it to contact@craftquantities.com with your inputs — a confirmed fix gets a permanent check of its own, so the same mistake cannot come back.