SettingsSettings for this calculationUS
The volume in litres.
European compost, soil and bark bags are labelled in litres, and so are mixer drums, water butts and rainwater tanks. A thousand litres is one cubic metre.
Volume
1.766 cu ft
1 L = 1 ÷ 28.316846592 cubic feet ≈ 0.0353147 cu ft. Convert the volume, then round bag, drum or load counts up — containers come in whole units.
- Litres entered
- 50 L
- Cubic feet
- 1.77 cu ft
- Cubic metres
- 0.05 m³
- US gallons
- 13.21 US gal
They open the calculator with your figures already in it
Litres to Cubic Feet Calculator: 1.77 cu ft — shown in imperial, US market. The link sets both, so the result they see is the one on your screen.
Show calculation logicHide calculation logic
How this was calculated
Formula source(s)
- NIST SP 811, Appendix B — 1 ft³ = 0.02831685 m³
- International yard and pound agreement, 1959 — the foot is exactly 0.3048 m, so 1 ft³ = 0.3048³ m³ = 28.316846592 L exactly
- BIPM, The International System of Units (SI Brochure), 9th edition — the litre is 1 dm³ = 0.001 m³
Inputs used
- Volume (L)
- 50
Intermediate steps
- Litres entered
- 50 L
- Cubic feet
- 1.77 cu ft
- Cubic metres
- 0.05 m³
- US gallons
- 13.21 US gal
Confidence note: 1 L = 1 ÷ 28.316846592 cubic feet ≈ 0.0353147 cu ft. Convert the volume, then round bag, drum or load counts up — containers come in whole units.
Estimated cost — your price
This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.
Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.
Sources checked 2026-09-16 · v1.0.0
Regulatory standards & verification citations3
- NIST SP 811, Appendix B — 1 ft³ = 0.02831685 m³
- International yard and pound agreement, 1959 — the foot is exactly 0.3048 m, so 1 ft³ = 0.3048³ m³ = 28.316846592 L exactly
- BIPM, The International System of Units (SI Brochure), 9th edition — the litre is 1 dm³ = 0.001 m³
Cite this page
Your workspace
Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.
Metric volumes reach the American side of a job through imported materials and equipment: growing media and bark labelled in litres, European-built mixers and water butts, rainwater and fuel tanks rated in litres. Converting to cubic feet lets the figure be read against a plan's cubic-foot quantities or a US product line. The arithmetic is exact. The care is in what the number stands for: a bag's litre figure is loose material as bagged, which settles once spread, and a tank's nominal capacity includes headspace a working fill never reaches, so measure to the level you will actually fill rather than converting the label.