SettingsSettings for this calculationUS
The volume in cubic metres.
A cubic metre is the unit bulk material is sold in across most of the world, and it is a larger quantity than it sounds — roughly a cube you could not reach across, and about two and a half tonnes of most aggregates. Container and skip capacities are quoted in it too, which is usually the reason to convert one into feet.
Volume
353.1 ft³
1 m³ = 1 ÷ 0.028316846592 = 35.3147 ft³. Exact by definition. Volume says nothing about weight until you apply a density, and nothing about compaction at all.
- Cubic metres entered
- 10 m³
- Cubic feet
- 353.15 ft³
- Cubic yards
- 13.08 yd³
They open the calculator with your figures already in it
Cubic Metres to Cubic Feet Calculator: 353 ft³ — shown in imperial, US market. The link sets both, so the result they see is the one on your screen.
Show calculation logicHide calculation logic
How this was calculated
Formula source(s)
- NIST SP 811, Appendix B — 1 m³ = 35.31467 ft³
- International yard and pound agreement, 1959 — the foot is exactly 0.3048 m
Inputs used
- Volume (m³)
- 10
Intermediate steps
- Cubic metres entered
- 10 m³
- Cubic feet
- 353.15 ft³
- Cubic yards
- 13.08 yd³
Confidence note: 1 m³ = 1 ÷ 0.028316846592 = 35.3147 ft³. Exact by definition. Volume says nothing about weight until you apply a density, and nothing about compaction at all.
Estimated cost — your price
This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.
Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.
Sources checked 2026-09-12 · v1.0.0
Regulatory standards & verification citations2
- NIST SP 811, Appendix B — 1 m³ = 35.31467 ft³
- International yard and pound agreement, 1959 — the foot is exactly 0.3048 m
Cite this page
Your workspace
Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.
Most of the traffic in this direction is verification rather than ordering: a metric quantity has arrived — on a delivery note, a skip listing, a specification written abroad — and it has to be checked against something measured in feet on site. That makes the cubic yard the real destination more often than the cubic foot, since the yard is the ordering unit wherever the foot is the measuring one, and it is carried in the breakdown for that reason. The page also declines, twice and deliberately, to turn volume into weight. It is the question people arrive with, and answering it needs a density that depends on a material this page has not been told about.