SettingsSettings for this calculationUS
The total grout volume needed, from a joint volume calculation.
This is the volume of grout the joints will consume — for example, the joint volume the Grout Calculator shows in its working, or the Quarry Tile Grout Volume Calculator's figure.
The specific grout product's density.
Density varies by grout type and product — check your specific product's technical data sheet for its exact value.
Grout mass needed
53.4 lb
Density varies by grout type — sanded cement grout is commonly ~1600 kg/m³ (100 pcf), unsanded ~1500 kg/m³ (94 pcf), and epoxy grout can be denser — check your specific product's technical data sheet.
They open the calculator with your figures already in it
Grout Weight Consumption Calculator: 53.41 lb — shown in imperial, US market. The link sets both, so the result they see is the one on your screen.
Show calculation logicHide calculation logic
How this was calculated
Formula source(s)
- Grout mass = grout volume × the specific grout product's density; useful when purchasing bulk grout by weight rather than counting pre-packaged bags, since density varies notably between sanded, unsanded, and epoxy grout
Inputs used
- Required Grout Volume
- 4 gal
- Grout Density
- 99.88 pcf
Confidence note: Density varies by grout type — sanded cement grout is commonly ~1600 kg/m³ (100 pcf), unsanded ~1500 kg/m³ (94 pcf), and epoxy grout can be denser — check your specific product's technical data sheet.
What this calculation does not cover
- Nothing is added for waste. The mass returned is the joint volume multiplied by the density and nothing else, so it makes no allowance for grout left in the mixing tub and on the float, material washed back out with the sponge, joints struck slightly proud, or a batch that stiffens before it is worked in. Order above this figure rather than to it.
- One density is applied to one volume with no water term anywhere in the arithmetic, so the result is the mass of grout occupying the joints, not the weight of dry powder to buy. Bulk cement grout is sold as a dry blend that picks up mixing water on site; enter a dry bulk density if you are ordering powder by weight, and a mixed density only if the in-place mass is what you want.
- The volume figure is taken entirely on trust. Joint width, joint depth, tile format and how completely the joints are actually filled are never seen here — the calculation multiplies whatever number is typed in, so any optimism in the upstream joint-volume estimate is carried straight through into kilograms.
- The answer is a continuous mass figure with an empty breakdown behind it: no sack or pail count, no pack size, and no rounding up to a whole purchasable unit, so the figure you get is not a figure you can buy from a product that ships in fixed sacks. The volume field also stops at 200 litres (53 gal), roughly 320 kg (700 lb) at the default density, so a genuinely bulk order has to be split across several runs and added up by hand.
- The density field accepts 1200 to 1900 kg/m³ (75 to 119 pcf) and refuses anything outside it, so a product heavier than that ceiling cannot be entered even though the note beneath the answer allows for denser epoxy grouts. Within the range the value is treated as fixed for the whole batch, so the same product mixed wetter or stiffer than the basis its data sheet quotes will not weigh what this returns.
Estimated cost — your price
This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.
Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.
Sources checked 2026-09-17 · v1.1.2
Regulatory standards & verification citations1
- Grout mass = grout volume × the specific grout product's density; useful when purchasing bulk grout by weight rather than counting pre-packaged bags, since density varies notably between sanded, unsanded, and epoxy grout
Cite this page
Your workspace
Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.