Sustainability & Compliance

Weekly Noise Exposure (LEP,w) Calculator

Average a week of daily noise exposures into LEP,w, the figure UK and EU rules allow instead of the daily one when exposure varies markedly by day.

  • Answers as you type
  • Every formula cited
  • Calculated in your browser
SettingsSettings for this calculationUS
Market
Imperial · sales tax
That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

That day's daily personal noise exposure, or zero for a day not worked.

Each day's LEP,d, worked out from the tasks of that day on the daily exposure page or taken from a dosimeter. Leave a day at zero if no work was done on it: it then contributes nothing, and the week is still divided by five, which is how the regulations define the weekly figure.

Weekly personal noise exposure, LEP,w

86 dB(A)

ComparisonA comparison, not a check — no result here is an approval.

86.0 dB(A) over the week is at or above the upper exposure action value of 85 dB(A), and below the 87 dB(A) exposure limit value. Where the weekly figure is used in the EU, the conditions attached include that it does not exceed 87 dB(A), and the loud days still carry the controls their own daily figures call for. Each of these regulations requires the risk from noise to be reduced at every level, so no figure here is a finding that the noise is acceptable.

Days worked
5 days
Loudest day, Monday
92 dB(A)
The loudest day's share of the week's noise energy
79.85 %
Loudest day minus the weekly figure
6.01 dB
Then change the inputs to see how far the answer moves.

Show calculation logic

How this was calculated

Formula source(s)

  • Control of Noise at Work Regulations 2005, Schedule 1, Part 2: LEP,w = 10 log10[(1/5) × Σ 10^(0.1 × (LEP,d)k)], summed over the working days k of the week — divided by five whatever the number of days worked
  • Control of Noise at Work Regulations 2005, regulation 4(6): where exposure varies markedly from day to day, weekly personal noise exposure may be used in place of daily; Directive 2003/10/EC, Article 3(3), allows the same on condition that the weekly level shown by monitoring does not exceed the 87 dB(A) exposure limit value and that the risk from the noisy work is reduced to a minimum

Inputs used

Monday LEP,d (dB(A), 0 if not worked)
92
Tuesday LEP,d (dB(A), 0 if not worked)
80
Wednesday LEP,d (dB(A), 0 if not worked)
80
Thursday LEP,d (dB(A), 0 if not worked)
80
Friday LEP,d (dB(A), 0 if not worked)
80
Saturday LEP,d (dB(A), 0 if not worked)
0
Sunday LEP,d (dB(A), 0 if not worked)
0

Intermediate steps

Days worked
5 days
Loudest day, Monday
92 dB(A)
The loudest day's share of the week's noise energy
79.85 %
Loudest day minus the weekly figure
6.01 dB
Final result85.99 dB(A)

Confidence note: 86.0 dB(A) over the week is at or above the upper exposure action value of 85 dB(A), and below the 87 dB(A) exposure limit value. Where the weekly figure is used in the EU, the conditions attached include that it does not exceed 87 dB(A), and the loud days still carry the controls their own daily figures call for. Each of these regulations requires the risk from noise to be reduced at every level, so no figure here is a finding that the noise is acceptable.

What this calculation does not cover

  • It averages daily figures you already have. Each must be a full LEP,d worked out the same way — from the tasks of that day, normalised to 8 hours — or the week is an average of unlike things.
  • Peak sound pressure is judged event by event and is never averaged over a week; one loud impulse is not diluted by quiet days.
  • The weekly figure is permitted only where exposure varies markedly from day to day, and in the EU only with the conditions attached; whether it is appropriate for a particular job is the employer's assessment, not this arithmetic's.
  • Averaging over a week describes the dose; it does not change what happens to hearing on the loud day, and the controls for that day are the ones the daily figure asks for.

Computed in your browser — nothing you enter is uploaded. Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.

Sources checked 2026-09-21 · v1.0.0

Regulatory standards & verification citations2
  1. Control of Noise at Work Regulations 2005, Schedule 1, Part 2: LEP,w = 10 log10[(1/5) × Σ 10^(0.1 × (LEP,d)k)], summed over the working days k of the week — divided by five whatever the number of days worked
  2. Control of Noise at Work Regulations 2005, regulation 4(6): where exposure varies markedly from day to day, weekly personal noise exposure may be used in place of daily; Directive 2003/10/EC, Article 3(3), allows the same on condition that the weekly level shown by monitoring does not exceed the 87 dB(A) exposure limit value and that the risk from the noisy work is reduced to a minimum
Cite this page

Your workspace

Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.

How to calculate weekly noise exposure (LEP,w) in 8 steps

  1. Monday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  2. Tuesday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  3. Wednesday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  4. Thursday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  5. Friday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  6. Saturday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  7. Sunday LEP,d (dB(A), 0 if not worked)That day's daily personal noise exposure, or zero for a day not worked.
  8. Weekly personal noise exposure, LEP,wThe tool computes the weekly personal noise exposure, LEP,w from those figures and shows the formula, its sources, and a confidence rating alongside it.

Weekly personal noise exposure, LEP,w by monday LEP,d (dB(A), 0 if not worked)

Page defaults, not your figures above.

Monday LEP,d (dB(A), 0 if not worked)Weekly personal noise exposure, LEP,w (dB(A))
1079
2079
5079
10093.2

Frequently asked questions

When can a weekly average be used instead of a daily figure?
Under the UK regulations, where a worker's exposure varies markedly from day to day — a crew breaking out concrete one day a week and doing quiet work the rest, for instance. EU law allows it on conditions: the weekly figure must not exceed the 87 dB(A) limit value, and the risk from the noisy work must still be reduced to a minimum. It is a way of describing an uneven week fairly, not a way of making a loud day disappear.
Why does working a sixth day raise the weekly figure?
Because the regulations divide the week's noise energy by five whatever the number of days worked. Five days at 85 dB(A) is 85; add a sixth at 85 and the energy rises by a fifth with the divisor unchanged, which is 85.8 dB(A). A week with fewer days is treated the same way in reverse, so three days at 88 come to 85.8 as well.
Does a quiet week make one very loud day acceptable?
The weekly figure says what the week's total dose is, and on that measure a quiet week does offset a loud day. What it cannot do is change what happened to hearing on the loud day, and the peak values are never averaged. The controls a loud day needs — hearing protection, noise control, reducing the time — are the ones its own daily figure calls for, which is why the daily page is still worth running for that day.
Preliminary estimate, not certified engineering. This tool produces an indicative quantity calculation for planning purposes only — it is not a certified structural analysis, a guaranteed material takeoff, or a substitute for building department approval. Always verify measurements on-site and have a licensed contractor or structural engineer review any load-bearing, code-sensitive, or safety-critical work before purchasing materials or starting construction. Spotted an arithmetic or standards error? Report it to contact@craftquantities.com with your inputs — a confirmed fix gets a permanent check of its own, so the same mistake cannot come back.