From this site

One project, every trade

Each calculator adds its lines to a single estimate — consolidated BOM, schedule and cash-flow included.

Open My Project →

Retaining Wall Block Calculator

Estimate how many retaining wall blocks you need, based on wall face area and block face size.

Computed in your browser — nothing you enter is uploaded. Figures are presented in United States units and terminology, and each formula’s basis is cited under regulatory standards below.

Last verified 2026-08-25 · v1.0.0

Market
Imperial · sales tax
19.5 ft1.5 ft
Schematic, drawn to the proportions you entered — not to scale on screen.

Estimated retaining wall block needed

58 blocks

High confidence
Wall face area
39 sq ft
Courses (rows)
5 courses

Running these inputs gives 58 blocks as the result. Currently reading for United States — pick a different market above and the figures re-cast accordingly.

Estimated cost — your price

This site holds no price list for this material — local prices vary too much to publish honestly. Enter your supplier's price and the result is costed with it.

Preliminary estimate, not certified engineering. This tool produces an indicative quantity calculation for planning purposes only — it is not a certified structural analysis, a guaranteed material takeoff, or a substitute for building department approval. Always verify measurements on-site and have a licensed contractor or structural engineer review any load-bearing, code-sensitive, or safety-critical work before purchasing materials or starting construction. Spotted an arithmetic or standards error? Report it to contact@craftquantities.com with your inputs — a confirmed fix gets a permanent check of its own, so the same mistake cannot come back.

Presented in US customary units and US trade terminology. Where a formula follows a published standard, that standard and its edition are cited beside it on this page; where none governs, the page says so. Local amendments override model codes — verify against the code in force where you build.

Regulatory standards & verification citations

  • Block count = wall face area / block face area, with a waste allowance for cuts at ends and corners

Your workspace

Most jobs need more than one number. Add the calculators you need next and they open right here, underneath this one — your figures stay on screen and nothing is lost to a page change.

Frequently asked questions

Does this include the base course?
The base course is often buried below grade and sits on a compacted gravel leveling pad — include it in your height input only if you want it counted, otherwise calculate it separately.
Do taller retaining walls need extra engineering?
Yes — walls over about 3-4 ft (varies by jurisdiction) commonly require an engineered design and permit due to the soil pressure involved. Check local code before building a tall wall.
Does this include cap blocks?
No — cap/coping blocks that finish the top course are a different product, typically sold and calculated separately by linear length.